Triple .308 Mag Placard

If you run a .308 rifle you already know the drill. Most triple mag placards are built around 5.56 cells, so getting three .308 mags on your chest means fighting the platform. You either buy an expandable pan, swap out inserts every time you change guns or just shove the mags in and hope the elastic gives up before your patience does. The retention is inconsistent, the mags sit crooked and the reload you practiced does not happen the same way twice.

This one is sized for .308 from the start. Three cells, three SR-25 or DPMS pattern mags, no inserts to swap and no pan to expand. You load it, it holds and every mag indexes the same way every time you reach for it. The elastic is tensioned for the weight of a loaded 20 rounder so the mags stay put when you move but still come out clean when you pull.

Everything else carries over from the Laser Triple Mag you already know. Laser cut MOLLE across the front and both sides gives you room to build out with a GP 4x6x2 Single Mag Pouch, a tourniquet holder, a Pistol Mag Cell or whatever your setup calls for. The front loop field takes hook backed pouches and patches. The interior is loop on loop so if you ever do want to run a different insert, you can.

Hook backing and 1″ male buckles up top mean it drops onto the AMP Plate Carrier QASM front or any placard ready carrier without hardware changes. Want more retention on a heavier mag? Add the Curve Retention Kit or Bungee Bridge Kit.

Handmade in Knoxville, TN USA

Dimensions: 10.75" W x 5.5" H
Weight: 6.2 oz
Front Laser Grid: 6 Columns x 5 Rows
Back: Hook

1x Triple .308 Mag Placard
2x Male buckles
1x Triple Mag Elastic Insert(.308)

Attaches via 1" Male buckles to any carrier or rig with loop Placard has Hook on the back
Inside features Loop/Loop for maximum compatibility with all inserts on the market

Holds:
3(.308)Mags
2(.308) + 1 (5.56)
3(5.56)extra space on the sides
6 Pistol Mags
Fits SR-25 and DPMS pattern .308 magazines

Run it as a standalone chest rig
Add four 1" female side buckles directly to the placard and it interfaces with any standard chest rig harness. No modification to the base platform.

If you prefer First Spear Tubes hardware mounts directly in place of the buckles.

The back is hook so when you run it as a rig add a Hilo Bodyside Mesh Pad or Zipper Rear Pack to cover the hook surface and keep it comfortable bodyside.

What magazines fit?
It holds three .308 or 7.62 magazines and fits SR-25 and DPMS pattern mags. With the included inserts you can also run 5.56 or pistol mags.

How does it attach?
It mounts with 1" male buckles and hook backing to any placard ready carrier or rig with loop. Adjustable straps let you set the ride height.

Is this different from your 5.56 placard?
This one is sized for .308 from the start. If you run 5.56, see our Laser Triple Mag Front Placard.

Material: Laminate
Velcro brand Loop/Hook
1" Male buckle attachment (top)
Adjustable straps (One Wrap)
Berry & NIR Compliant
Handmade in Knoxville, TN USA